Other Applications | Puls Electronic

Puls Electronic

Ömerli Mahallesi
Seciye Sokak No: 9
Hadimköy - Arnavutköy
Istanbul - TÜRKIYE

Phone : +902127983636 [pbx]
Fax: +902127982629

E-Mail : info@puls.com.tr

Other Applications

• Static Applications » Other Applications » Plastic Bottle Conveyor Lines App. Sheet
	As PET bottles travel at high speed along conveyor lines the friction generates high levels of static electricity. If they spark to earth, the omitted radio wave can affect electrical circuits and metal detectors. It is also possible that as the bottles are being charged to the same polarity, they will repel from each other and jump off the conveyor into the air. By positioning More»

• Static Applications » Other Applications » Electronic Weigher Static Application
	Static charges on a weigher cause some problems like unpleasant operator?s shocks, data and indicator errors, fault weight of the material and changing weight of the material. Because, dust and particules adding to the material change the weight if you use labratory weigher.If H&O Antistatic bars are positioned to the right place, they provide effective More»

• Static Applications » Other Applications » Chocolate Manufacture
	Two different colours of chocolate are injected into the mold as shown in the figure. If these two products have the same static charges, they push each other and if they have the opposite static charges, It causes form changing of the chocolate. In addition to these problems, they attracts dust so it isn?t an acceptable condition. It may cause electrical shocks and. More»

• Static Applications » Other Applications » Contamination on Plastic Parts App. Sh.
	After moulding, many plastic parts have further manufacturing process to go through prior to packing and shipping. If parts are to be painted, the high levels of static which are generated in the moulding process attract dust, dirt and other airborne contamination on to them. If the parts are not cleaned, the high levels of inclusions create re-work or rejects.By bathing More»

• Static Applications » Other Applications » Multi Head Labelling Machine App. Sh.
	Labels can be misaligned or repelled from charged bottles due to large static charges which are generated as the bottles move through conveyor systems. The bottles encounter high levels of friction which charge them. When the bottles are positioned to have the label fitted, the static charge on the bottle, as well as the charge on the label (generated as the backing More»

• Static Applications » Other Applications » ESA on Plastic Parts Application Sheet
	Plastic parts when stored in a collection container, typically after injection moulding will carry a static charge. Although the charge on each individual part may be low, the accumulative charge will be very high. A small moulding may have only 10v of static electricity on it?s surface, but if you add another 10,000 parts to the collection, you now have an electro. More»

• Static Applications » Other Applications » Laminating Application Sheet
	When laminating or bonding two or more surfaces together, problems can arise when static charges can force the surfaces apart. If using an adhesive or weld tool, you require the surfaces to be flush and without creases or curls.By passing the material after assembly under a charge bar (An earth or ground is required on the other side) you can bond the stack together More»

• Static Applications » Other Applications » Vibratory Bowl Feeder Application Sheet
	When plastic parts are placed in a vibrating bowl feeder, the friction causes them to charge. The charged parts then can jump out of the bowl, stick to machine casing and other earth potentials or cause misfeeding.By positioning a PULSElectronic Pulse DC bar above the vibrating bowl feeder, you will bathe the entire area in ionised air removing any possibility More»