Packaging Applications | Puls Electronic

Puls Electronic

Ömerli Mahallesi
Seciye Sokak No: 9
Hadimköy - Arnavutköy
Istanbul - TÜRKIYE

Phone : +902127983636 [pbx]
Fax: +902127982629

E-Mail : info@puls.com.tr

Packaging Applications

• Static Applications » Packaging Applications » Over Wrapper Packaging Mac. A. S.
	On an over wrapping machine, the film is charged as it un-winds from the reel. Ths charge will attract airborne contamination onto the material which results in rejects and loss of revenue. The static charge can also jam the machine as the charge becomes so high that it attracts to the machine rollers which act as an earth potential. By fitting PULSElectronic ionising bars. More»

• Static Applications » Packaging Applications » Shrink Wrap Machine App. Sh.
	Large static charges on shrink wrap machines are generated as the material un-winds from the reel. These charges increase as the web passes over rollers. The charged material will then become attracted to earth potentials such as grounded rollers or and metallic part of the machine which is earthed. This is called material misbehaviior.By positioning a PULSElectronic. More»

• Static Applications » Packaging Applications » Labelling Machine Application Sheet
	Labels can be misaligned or repelled from charged bottles due to large static charges which are generated as the bottles move through conveyor systems. The bottles encounter high levels of friction which charge them. When the bottles are positioned to have the label fitted, the static charge on the bottle, as well as the charge on the label (generated as the backing tape. More»

• Static Applications » Packaging Applications » Vertical Form filling Machine A. S.
	Static charges are generated as the material is un-wound from the reel. These charges increase as the web passes over rollers and into the forming area. The static charge will create an electro magnetic field which attracts airborne contamination onto the web. This can be a catastrophic problem in food packaging sector.By positioning two PULSElectronic ionising bars. More»

• Static Applications » Packaging Applications » Automated Sleeving Machines A. S.
	On automated sleeving machines, the problems arise as the sleeve is opened for fitting to the bottle. As the sleeve is opened, the two surfaces are separated and electrons migrate from one surface to another. As the material is Non conductive, it cannot re-address the imbalance and retains the static charge.The charged labels will now become attracted to an earth. More»

• Static Applications » Packaging Applications » In mould labelling Application Sheet
	During in-mold labelling applications, the label can be attracted or repelled from the surface of the mould dependant on what charge is on either surface. The robot arm will pick the label and position the label.If the label is the same polarity as the surface of the mould, the label will be repelled from the mould and rejected. If the label is of the same polarity, the label. More»

• Static Applications » Packaging Applications » Static Application in Packaging Mac.
	In packaging machines while rolled film is unwrapped, static charge occurs because of decomposition. This static charge causes film to stick to the metal parts or itself so leads to incorrect and lossy production.For preventing this situation, anti-static bar should be placed on sections in which roll is opened and packaging begins for neutralizing static charge. More»

• Static Applications » Packaging Applications » Stacking Application Sheet
	When magazines are printed they are conveyed and stacked on top of each other. This can cause major down time when rotating the stack as the magazines fall off.By positioning a PULSElectronic charge system either side of the stack (positive one side, negative the other) you can induce a charge in to the stack and hold the stack in place for packing, rotating and binding. More»

• Static Applications » Packaging Applications » Flat Bag Cutting Machine App. Sh.
	After the manufacturing cycle of a flat bag making machine, the bag will have built up large static charges from the un-wind. Friction of rollers and the heat from the thermo welding. Although highly charged, the bags are under tension and do not cause the manufacturer problems. When the bags are cut, the static charge then will cause the material to attract to an. More»

• Static Applications » Packaging Applications » Typical Un-Wind and Re-Wind App.
	On any un-wind operation, as the web is pulled from the roll, you have material separation. As the surfaces separate, electrons from each surface will migrate from one surface to another. As the surface of the material is non-conductive, it cannot flow back and a static charge is now on the web. This charge will create an electro-magnetic field which in turn attracts airborne. More»

• Static Applications » Packaging Applications » Polythene Bag Handle Charging App.
	When reinforcing the handles on plastic bags, a further sleeve is added for strength. This sleeve can repel from it set position due to static charges on ether the bag or the sleeve itself. This causes misalignment, wastage, down time and rejects.After the sleeve has been positioned, you can induce a charge into the material using a PULSElectronic charging system. More»

• Static Applications » Packaging Applications » Nylon Bag Opening Static Applica.
	In bag production for forming handle part of bags, handle part is generated with a cutting knife system before cutting process. During this process air can enter in plastic which will cause incorrect cutting. This will lead to lossy and incorrect production.For preventing this production problem, charging bar should be placed before cutting knife which has opposite charges. More»

• Static Applications » Packaging Applications » Static Electricity on Parisons Ap. Sh.
	As the parisons are extruded from the machine they will start to cool. As they cool, the molecules inside the polymer will rub against each other and a static charge will be generated. As the charge increase, the parisons will start to repel from each other as they will all have the same charge due to identical manufacturing process and material make up. This will cause damage. More»

• Static Applications » Packaging Applications » Thermoforming Machine App. Sh.
	During the thermo forming process, the polymer is heated to form the product. As the product exits the mould, the material will cool causing the molecules to rub against each other which generates the static charge.This static charge creates an electro magnetic field which in turn will attract airborne contamination onto the product. This will lead to rejects and. More»