HT(1) type load cells are low profile. Work with principle of shear beam. They are available in 350 or 700 ohm. The flexure is made of a special alloy steel and it is ideal for low and middle capacity applications. HT(1) load cells were designed for both tension and compression applications. The sensing element is covered with special materials that isolate it from industrial environments. Stainless steel and nickel-plated HT(1) load cells are highly protected from external agents such as rain, dust, water that can make troubles for a good performance. They highly withstand to overloading and to the effects of off-axis loading.
Applications
- Material testing machine
- Lifting crane applications
- Various weighing applications
Capacity
The HT(1)series load cells are produced in 1,2,5,10,20,30,50,100 ton capacities
| | | Type | HT(1) |
| | Accuracy class | C1 1000d |
| | Capacity (Emax) | 1-2-5-10-20-30-50-100 T |
| | Minimum dead load | 0% R.O |
| | Rated output R.O | 2,0 mV/V |
| | Maximum number of load cell interval Nmax | 1000 |
| | Vmin | Emax/4000 |
| | Emax / Vmin | 4000 |
| | Minimum dead load output return (MDLOR) | <0,0500 %R.O |
| | Zero balance | 1 %R.O |
| | Temperature effect on zero | << 0,0070 %R.O/5C |
| | Temperature effect on output | < 0,0055 %R.O/5C |
| | Compensated temperature range | -10 /+40 C |
| | Temperature range safe | -30 /+70 C |
| | Maximum safe central overload | 150 %R.O |
| | Ultimate central overload | 300 %R.O |
| | Excitation | 5 V |
| | Input impedance | 76060 ? |
| | Output impedance | 7006 ? |
| | Insulation resistance | >1000 M? |
| | Construction | Nickel plated alloy steel |
| | Environmental protection | IP67 |
| | Cable type | 2x2x0,22 mm |
| | Cable length | 1-2-5T 3m |
| 10-20-30-50-100T 5m |
| | Weight | 1-2-5T
10-20T
30-50T
100T | ? kg |