Power Supply is source with high voltage generator designed for devices of active ionization. It can be one or two-fan. Its set-up and operation is simple in use and does not need any additional care. It is possible to supply the operation for more than one static bar. There is a protection card inside of it for the system security in case of short circuit. Power Supply cuts down current and disables circuit in connected to it high voltage cable of ionization devices or ionizer. That provides longer life and safety to the transformer, what is inside of power supply.
Due to high technologically design used in Power Supply it became possible to produce more efficient results to solve the static troubles, even in high-speed applications. Power Supply does not need any calibration and can be cleaned and cared easily. Using Power Supply will supply machines to perform hygienic, safe and qualitative production. Power Supply can be designed in different lengths to satisfy the requirements of needs of application.
General Specification
Easy to install / High performance / Safety / Long life
Applications
Coating / Laminating / Plastic bag / Sheeting / Slitting / Rewind / Form fill seal / Stretch wrapping / Wrapping machines / Paper production / Blown film, cast film / Extrusion, flexo sheet / Inkjet, laser / Folding
| | | Main Voltage | 220-230 VAC / 110V AC |
| | Main Frequency | 50 / 60 Hz |
| | Main Connection | IEC-320 Europe Type |
| | Fuse | 160 m AT/A |
| | Output Voltage | 7.5 k VAC |
| | Max Output | Less than 5 mA |
| | Connections | 4 |
| | Ambient Temperature | 0 - 60 C |
| | Weight | 3.2 Kg |
| | Dimensions | 127.5 x 260 x 100 mm (width x height x length) |
| | Approval | CE |